深圳市上优泰科技有限公司
普通会员 第21年
未通过企业工商认证
公司服务热线
18928498573
手提式PH计生产,生产携带式PH计,生产PH-907,便携式PH计生产厂家.PH-907 portable PH INSTRUCTION 一、 Panel instruction l ON/OFF ： power switch l MODE ： function switch， Repeating：PH →MV→ TEMP every press l CALIB ： 7.00 calibration (6.86) l SLOP ： 4.00 calibration (9.18、10.01) l TEMP ： temp compensation manually 二、 Easy to operate 1、Put the sensor in water , Turn the power on ,and LCD display current PH value ,if you need to calibrate , please check the calibration part of the manual. Wait for the reading to stabilize. It needs a few minutes to equalize the temp and all the condition . 2、 Change a ORP sensor if you want to measure ORP in a solution ,THEN press the MODE key when you’ve changed your sensor。 3、 For Temp compensation , you can easily turn the TEMP knob to the temp in witch the solution is。 三、 PH Calibration 1、Put the clean PH sensor into buffer 7.00，a few agitation，wait for the reading to stabilize(suggest at least 5mins)，turn CALIB knob to make the value reach 7.00 steadily。Recommend tuning slowly. 2、Wash the sensor with distilled water and wipe it with soft tissue。 3、Put the clean PH sensor into buffer 4.00(or 9 .18)， agitate a little，wait for the reading to stabilize(suggest at least 5mins)，turn CALIB knob to make the value reach 4.00(or 9.18) steadily。 4、You may repeat the calibration process for 2-3 times for accuracy。 NOTE：1、When calibrate ORP sensor please select the right ORP standard。 2 pH sensor ‘s Temp range is 0-80℃ 3、PH value is a parameter related to Temp, for accurate measure temp compensation is necessary . 4、storage for a long time ,such as weeks or months ,the sensor should be cleaned sufficiently BASIC CON：suitcase，9V battery ，combination PH sensor，buffer 7.00and4.00， manual。手提式PH计生产,生产携带式PH计,生产PH-907,便携式PH计生产厂家. |
| 关键字：手提式PH计(PH-907) |
